Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear windshield wiper of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Windshield wipers

See other generations:
Video tutorial

If you are planning to replace the rear windshield wiper of your Fiat Panda second series by yourself, just read the following guide carefully and apply what is described. First of all, park the car safely and then reach the rear part and lift the windshield wiper.

Once you have done that, act on the central hook and remove the windshield wiper in question, then install a new one making sure it is perfectly compatible with your Fiat Panda Mk2. Finally, reposition the windshield wiper on the rear window and the procedure is successfully completed.


Posted on 2 August 2025 by ScegliAuto


Related tutorials

How to replace the rear wiper on a Fiat Panda?
How to replace the rear wiper on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear wiper on a Fiat Panda, lift the plastic cover at the base of the wiper and loosen the nut underneath using a 10 mm spanner. This …
Replacing the Rear Windscreen Wiper Blade on a Fiat Panda
Replacing the Rear Windscreen Wiper Blade on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video, you will learn how to replace the rear wiper blade on a Fiat Panda 312. To do this, lift the wiper blade away from the rear glass: the…
How to Dismantle the Rear Wiper Motor of the Fiat Panda 4x4 (141)
How to Dismantle the Rear Wiper Motor of the Fiat Panda 4x4 (141)
Fiat Panda (1980-2003 / MK 1, 141) In this video, you will see the steps that will allow you to dismantle and replace the rear wiper motor of the first series Fiat Panda 4x4, version 1…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos