Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Windscreen Wiper Blade on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Windshield wipers

In this video, you will learn how to replace the rear wiper blade on a Fiat Panda 312. To do this, lift the wiper blade away from the rear glass: the operation is very simple; just grasp the blade and pull it towards you to remove it. Now, using the specific fitting you see on the wiper, install the new blade by inserting it and securing it with a bit of force. At this point, you will have finished fitting it. Remember to use original or high-quality blades to ensure visibility in case of rain!

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear wiper on a Fiat Panda?
How to replace the rear wiper on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear wiper on a Fiat Panda, lift the plastic cover at the base of the wiper and loosen the nut underneath using a 10 mm spanner. This …
How to Replace the Wiper Blades on a Fiat Panda?
How to Replace the Wiper Blades on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Replacing the wiper blades on a Fiat Panda is a very simple and quick task. First, switch off the vehicle and position the wipers in the rest positio…
How to Replace the Wiper Blades on a Fiat Panda
How to Replace the Wiper Blades on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let's see how to replace the front wiper blades on a Fiat Panda. Grasp the front wiper with your hands, gently pull the movable wiper (without breaki…

    Frequently Asked Questions

    • Panda 2012-2026 - Where is the Fiat Panda wiper fluid reservoir located? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos