Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replace the Water Pump on the Fiat Panda 1.2 (169)

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Pump

In this guide, we will see the main instructions for disassembling and replacing the water pump, as well as the timing belt, on the Fiat Panda 1.2, second series. First, open the bonnet of your car and start by removing the air filter box; then drain the coolant by disconnecting the hose. Next, lift the vehicle and remove the V-belt and the crankshaft pulley; also disassemble the timing belt to unscrew the fixing bolts of the water pump, and then replace it!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Water Pump on a Fiat Panda
How to Replace the Water Pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the water pump on a Fiat Panda, lift the car so that the front right wheel is off the ground: this wheel will then need to be removed alon…
Replacing the Front Shock Absorbers on the Fiat Panda 169
Replacing the Front Shock Absorbers on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This guide outlines the main steps to remove and replace the front shock absorbers on the Fiat Panda 169, second series. First, lift the vehicle and …
Removing the Front Headlamp and Bulb on the Fiat Panda 169
Removing the Front Headlamp and Bulb on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Discover how to remove the front headlamp and replace the bulb on the Fiat Panda 169, second series. First, remove the front wheel arch liner by unsc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos