Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Replacement of the Fiat Panda 900 Fire service belt

Fiat Panda - Video tutorial

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: V-belt
Operation: Replacement of the Fiat Panda 900 Fire service belt

Let's see in this short video the procedure necessary to remove and replace the service belt of the Fiat Panda first series, with 900 Fire engine. First of all, we open the bonnet and disassemble our air filter box, unscrewing the screws on the sides and disconnecting it from the intake sleeve; after which we use a socket wrench to loosen the belt tensioner, in order to permanently remove our service belt, as shown in the video. At this point we replace the belt and reassemble everything, making sure it has been inserted perfectly!


Posted on 5 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos