Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Fiat Panda 4x4

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Timing belt

See other generations:
Video tutorial

Today's guide will illustrate some important steps on how to remove and replace the timing belt on the Fiat Panda 4x4. The timing belt on the Panda 900 and 1000 with Fire engine should be replaced every 50,000 miles or six years; however, it is advisable to perform a visual inspection before this mileage.

Open the bonnet and remove the timing cover; then take the necessary references for replacing the timing belt, replacing the water pump kit if necessary, following the video tutorial to the end!


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Fiat Panda?
How to Replace the Timing Belt on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Good morning, today's guide aims to replace the timing belt on your Fiat Panda. Start by opening the front bonnet. Next, remove all components relate…
Replacing the Crankshaft Pulley on a Fiat Panda 4x4 Trekking When It Breaks
Replacing the Crankshaft Pulley on a Fiat Panda 4x4 Trekking When It Breaks
Fiat Panda (1980-2003 / MK 1, 141) In this video tutorial, you can see when to replace the crankshaft pulley on a Fiat Panda 4x4 Trekking when it breaks. The pulley connects to the cra…
How to Replace the Timing Belt on a Fiat Panda 1.2
How to Replace the Timing Belt on a Fiat Panda 1.2
Fiat Panda (2012-2026 / 319, MK 3) This guide shows you how to remove and replace the timing belt on a Fiat Panda 1.2. First, raise the vehicle and remove the front right wheel; then t…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos