Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Fiat Panda 1.2

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Timing belt

This guide shows you how to remove and replace the timing belt on a Fiat Panda 1.2. First, raise the vehicle and remove the front right wheel; then take off the wheel arch liner and disconnect the auxiliary belt, followed by removing the crankshaft pulley as shown in the video. Next, remove the timing cover to access the belt, taking it off and replacing it with a new original one; set the timing and refit all previously removed components!

Updated on 4 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How and When to Change the Timing Belt on the Fiat Panda 1.1
How and When to Change the Timing Belt on the Fiat Panda 1.1
Fiat Panda (2003-2012 / 169, MK 2) Briefly, we will see some important instructions on how and when to change the timing belt on the Fiat Panda 1.1 petrol; for this type of engine, it …
When to Replace the Timing Belt on a Fiat Panda?
When to Replace the Timing Belt on a Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) The timing belt on a Fiat Panda, like on any other vehicle, should be replaced every 75,000 miles. However, sometimes the timing belt can wear out pr…
How to Replace the Timing Belt on a Fiat Panda
How to Replace the Timing Belt on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you can see how to replace the timing belt on a Fiat Panda with a 1.2 8V engine by following some essential steps: the first …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos