Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
MK 3, 319
- Years 2012-2023 Today we will show you how to replace the timing belt of the Fiat Panda. The first thing to do is to open the front hood of the Panda and loosen the front wheel to then lift the car and completely remove the left front wheel. Now we can focus on removing the timing belt. To remove the timing belt, we must loosen the pulley from the tensioner so as to remove it completely. Insert the new belt and tighten the pulley to put it back under tension. Insert the wheel, tighten it, and lower the car back to the ground.
Posted on 5 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |