Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

Today we will explain how to replace the timing belt of the Fiat Panda. We start the replacement by opening the front hood, then we disassemble and remove the components related to the engine cover and air filter; this procedure could be difficult if you are not expert mechanics.

After removing the fixing screws, we disassemble the timing belt cover; loosen the pulley that keeps the belt tensioned and remove the belt itself. By doing this we will have finished with the disassembly, to install the timing belt we should follow the procedure in reverse.


Posted on 19 May 2025 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Fiat Panda
How to Replace the Timing Belt on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Today, you will learn how to replace the timing belt on a Fiat Panda. First, open the front bonnet of the Panda and loosen the front wheel, then lift…
How to Replace the Timing Belt on a Fiat Panda?
How to Replace the Timing Belt on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Good morning, today's guide aims to replace the timing belt on your Fiat Panda. Start by opening the front bonnet. Next, remove all components relate…
How to Replace the Timing Belt on the Fiat Panda?
How to Replace the Timing Belt on the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the timing belt on the Fiat Panda, open the bonnet to access the left side of the engine block: this can be removed to access the underlyi…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos