Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Auxiliary Belt on Fiat Panda 1.3 MultiJet

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: V-belt

See other generations:
Video tutorial

In this video tutorial, you will see the instructions for removing and replacing the auxiliary belt on a Fiat Panda 1.3 MultiJet, in the steps illustrated below. First, lift the vehicle and remove the plastic cover of the belt by unscrewing its fastening screws; then, use a spanner to loosen the belt tensioner to remove the belt, as shown in the video.

At this point, replace it with the correct new one and refit it properly, adjusting the tensioner; finally, refit the protective cover!


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Unscrew the Fuel Filter Collar of a Fiat Panda MultiJet
How to Unscrew the Fuel Filter Collar of a Fiat Panda MultiJet
Fiat Panda (2003-2012 / 169, MK 2) How do you unscrew the collar of the fuel filter on a Fiat Panda MultiJet without the proper tools, namely the removal key for the filter? If you are…
Replacement of the Timing Chain Kit on the Fiat Panda 1.3 Multijet
Fiat Panda (2003-2012 / 169, MK 2) Noise or even breakage of the timing chain in Fiat 1.3 Multijet engines is a fairly common defect, especially if maintenance is neglected; to carry o…
Guide to replacing the thermostat of the Fiat Panda 4x4 1.3 MultiJet
Guide to replacing the thermostat of the Fiat Panda 4x4 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) In this guide, we will see the instructions that will allow us to disassemble and replace the thermostat of the Fiat Panda 4x4 1.3 MultiJet. Let's op…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos