Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the thermostat of the Fiat Panda 4x4 1.3 MultiJet

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Thermostat

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble and replace the thermostat of the Fiat Panda 4x4 1.3 MultiJet. Let's open the car's hood and start removing the upper plastic cover; we remove the battery and the control unit located at the top right, in order to access the thermostat assembly, as shown in the video.

At this point, we disconnect the coolant hoses, letting the fluid drain into a container; we unscrew the screws of the thermostat assembly to remove it, replacing it with the new original one, following the video tutorial until the end!


Posted on 23 January 2026 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Fiat Panda 4x4
Guide to Replacing the Timing Belt on the Fiat Panda 4x4
Fiat Panda (1980-2003 / MK 1, 141) Today's guide will illustrate some important steps on how to remove and replace the timing belt on the Fiat Panda 4x4. The timing belt on the Panda 9…
How to Replace the Thermostat on a Fiat Panda
How to Replace the Thermostat on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the thermostat on a Fiat Panda, open the bonnet to access the components inside the engine block. The thermostat is connected to a pipe lo…
How to Replace the Thermostat on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video outlines all the necessary steps to replace the thermostat on a Fiat Panda 169, including how to replace the temperature sensor. By follow…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos