Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the ECU in the Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Control unit

This video shows where the engine control unit (ECU) is located in the Fiat Panda, useful if you need to replace it. As shown, it is situated inside the engine bay, specifically on the right side of the battery when looking at the vehicle from the front. Removing the ECU is straightforward; first, disconnect the two large upper connectors by unlocking their clips, then unscrew the various securing bolts. Always ensure the vehicle is off while working to avoid causing serious damage to the ECU.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse Box Location and Diagram for a Fiat Panda 2
Fuse Box Location and Diagram for a Fiat Panda 2
Fiat Panda (2003-2012 / 169, MK 2) The video shows where the fuses are located in the Fiat Panda 2 and some of their characteristics. The first box is located in the engine bay, next t…
How to Remove and Replace the ECU of the Fiat Panda
How to Remove and Replace the ECU of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This guide illustrates the main steps to remove and replace the ECU of the Fiat Panda, following the instructions below. First, open the bonnet of th…
Where are the fuse box, battery, and OBD port of the Fiat Panda located?
Where are the fuse box, battery, and OBD port of the Fiat Panda located?
Fiat Panda (2003-2012 / 169, MK 2) The Fiat Panda, model mk2, has two fuse boxes and an OBD port inside. The first fuse box is installed inside the cabin behind a part of the dashboard…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2012-2026 - Start and stop not available on Fiat Panda: what to do? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos