Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How do you replace the thermostat on the Fiat Panda?

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Thermostat
Operation: How do you replace the thermostat on the Fiat Panda?

To be able to replace the thermostat on the Fiat Panda, you have to open the hood so that you can access the components inside the engine block. The thermostat is connected to a pipe located on the side of the engine, next to the battery: once the pipe fixing ring has been unscrewed, it will be possible to remove it and loosen the bolts that secure the thermostat to the inside its housing. The piece can then be released and replaced with a new one; after the thermostat has been inserted, the hose can be connected again.


Posted on 10 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2003-2012 - How much does it cost to replace the thermostat in a Fiat Panda 1.2? Read Answer
    • Panda 2003-2012 - Where is the thermostatic valve of the 2003 Fiat Panda? Read Answer
    • Panda 2003-2012 - How much does the Fiat Panda thermostat cost? Read Answer
    • Panda 2003-2012 - What is the price of the thermostat for the Fiat Panda 1300 Multijet? Read Answer
    • Panda 2012-2021 - How much does it cost to replace the thermostat in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How much does the thermostat cost for the Fiat Panda? Read Answer
    • Panda 2003-2012 - What is the price of the thermostat for a Fiat Panda? Read Answer
    • Panda 2012-2023 - How much does the thermostat cost in the Fiat Panda 1.3 Multijet? Read Answer
    • Panda 2012-2023 - How much does it cost to replace the thermostat on a Fiat Panda? Read Answer
    • Panda 2003-2012 - How much does the Fiat Panda thermostat cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos