Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the thermostat of the Fiat Panda?

Model: Fiat Panda - Years 2012-2023
Part: Thermostat

To replace the thermostat of the Fiat Panda, you need to open the hood so that you have access to the components in the engine compartment: here you will be able to locate the air filter box, which must be removed from its housing by loosening the fixing screws. At this point, you will be able to access the components below, identifying the tube for the passage of the coolant connected to the radiator: by disconnecting the tube, you will be able to locate the thermostat below, which must be removed from its housing, replaced with a new one, and ensuring that everything is functioning properly.

Posted on 4 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Thermostat from a Fiat Panda
How to Remove the Thermostat from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you begin, open the bonnet of your Fiat Panda. Start by removing the upper air filter housing by unscrewing the fastening screws and disconnec…
How to Replace the Thermostat on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video outlines all the necessary steps to replace the thermostat on a Fiat Panda 169, including how to replace the temperature sensor. By follow…
How to Replace the Thermostat on a Fiat Panda
How to Replace the Thermostat on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Before you can begin, open the front bonnet of the Panda. Start by removing the spare wheel, the jack, and unfastening the engine cover. Next, remove…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos