Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Thermostat from a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Thermostat

Before you begin, open the bonnet of your Fiat Panda. Start by removing the upper air filter housing by unscrewing the fastening screws and disconnecting the associated hoses. Once done, remove the thermostat protection plate by unscrewing the securing nuts. At this point, disconnect the various hoses connected to the thermostat, then unscrew and remove the fastening bolts. After completing this step, you can remove the thermostat, completing the disassembly.

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Thermostat on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video outlines all the necessary steps to replace the thermostat on a Fiat Panda 169, including how to replace the temperature sensor. By follow…
Guide to replacing the thermostat of the Fiat Panda 4x4 1.3 MultiJet
Guide to replacing the thermostat of the Fiat Panda 4x4 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) In this guide, we will see the instructions that will allow us to disassemble and replace the thermostat of the Fiat Panda 4x4 1.3 MultiJet. Let's op…
How to Change the Thermostat on a Fiat Panda
How to Change the Thermostat on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Changing the thermostat valve on a Fiat Panda? Let's see how to remove it from the engine bay. Open the front bonnet, locate the parts to be removed.…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos