Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to unscrew the ring of the diesel filter of a Fiat Panda MultiJet

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Diesel fuel filter

How to unscrew the fuel filter ring of a Fiat Panda MultiJet, without having the appropriate equipment, namely the removal key for the filter? If we are DIY enthusiasts, we surely have some leftover pieces from previous work. Here a piece of timing belt or a piece of V-belt comes to our aid. By tightening this belt around the filter ring, obviously on the side that has the grooves, and tightening it well around it, we can then grab it with a needle-nose pliers, in order to tighten it better, and then turn it without difficulty.

Posted on 30 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on a Fiat Panda 1.3 MultiJet
How to Replace the Diesel Filter on a Fiat Panda 1.3 MultiJet
Fiat Panda (2012-2026 / 319, MK 3) This short video tutorial shows how to replace the diesel filter on a Fiat Panda 1.3 MultiJet of the third generation, produced from 2012 to 2022. Fi…
Removing the Fuel Filter on Panda 1.3 Multijet
Removing the Fuel Filter on Panda 1.3 Multijet
Fiat Panda (2003-2012 / 169, MK 2) How to replace the fuel filter on a Fiat Panda? Start by lifting the front bonnet, then disconnect the electrical connectors of the fuel filter. Unsc…
Essential Tasks for a Service on a Fiat Panda 169 1.3 MultiJet
Essential Tasks for a Service on a Fiat Panda 169 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) In this video, we can see the essential checks to perform for a full service on the Fiat Panda 169 1.3 MultiJet. To loosen the oil filter, remove the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos