Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on a Fiat Panda 1.3 MultiJet?

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Oil filter

See other generations:
Video tutorial

In this detailed tutorial, you will see how to replace the oil filter on a Fiat Panda 1.3 MultiJet. First, drain the oil completely by lifting the dipstick and opening the lower cap with a T45 Torx key. Next, loosen the screw securing the washer tube to create workspace.

After covering the auxiliary belt to avoid contamination, use a 32mm socket to unscrew the filter housing, remove it, and proceed with the replacement, ensuring to also replace the gasket.

Finally, reassemble everything by following the reverse procedure and refill approximately 3 litres of oil into the system.


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter on a Fiat Panda 1.3 MultiJet
How to Replace the Diesel Filter on a Fiat Panda 1.3 MultiJet
Fiat Panda (2012-2026 / 319, MK 3) This short video tutorial shows how to replace the diesel filter on a Fiat Panda 1.3 MultiJet of the third generation, produced from 2012 to 2022. Fi…
Essential Tasks for a Service on a Fiat Panda 169 1.3 MultiJet
Essential Tasks for a Service on a Fiat Panda 169 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) In this video, we can see the essential checks to perform for a full service on the Fiat Panda 169 1.3 MultiJet. To loosen the oil filter, remove the…
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos