Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the oil filter located in the Fiat Panda 100HP?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Oil filter

See other generations:
Video tutorial

In this video, you can see where the oil filter is located in the Fiat Panda 100HP and how to proceed if you need to replace it. This operation is obviously necessary when changing the oil. As shown, the filter is located at the bottom of the engine, just behind the bumper on the passenger side.

Before unscrewing it, drain all the oil from the system through the designated drain hole in the same position.

Once the replacement is fitted, you can finally add new oil through the fill hole located on the upper side of the engine.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…
Where is the pollen filter located in the 2016 Fiat Panda?
Where is the pollen filter located in the 2016 Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) The cabin air filter, more commonly known as the pollen filter, is an essential component that filters the incoming air into the cabin to prevent pas…
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos