Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Pump

See other generations:
Video tutorial

The following steps will show you how to remove and replace the windscreen washer pump on a Fiat Panda. First, open the bonnet and start by removing the front bumper, unscrewing all the fixing screws; you will find the washer pump attached to the reservoir at the back, as shown in the video.

At this point, disconnect the tubing from the reservoir and the pump, unplugging the electrical connector to remove it and replace it with the new one; ensure the wiring is correct and check its operation by topping up with the new washer fluid to the correct level!


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Replacing the Windscreen Washer Pump on a Fiat Panda
Replacing the Windscreen Washer Pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This guide briefly outlines the main steps to remove and replace the windscreen washer pump on a Fiat Panda. First, move to the front of the vehicle …
Where are the fuses located in the Fiat Panda?
Where are the fuses located in the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) The fuses in the Fiat Panda are contained within dedicated fuse boxes installed in the vehicle: in this model, you can find two boxes. The first is l…
Guide to replacing the windshield washer pump of the Fiat Panda
Guide to replacing the windshield washer pump of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Today's instructions will allow us to disassemble and replace the windshield washer pump of the Fiat Panda. To access it, it is necessary to remove t…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos