Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windscreen Washer Pump on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Pump

See other generations:
Video tutorial

This guide briefly outlines the main steps to remove and replace the windscreen washer pump on a Fiat Panda. First, move to the front of the vehicle and start by removing the right wheel arch liner to access the washer pump; then, disconnect the pump's hose, allowing the fluid to drain into a container.

Next, disconnect the electrical connector from the pump to remove it and replace it with the new one, finally topping up the washer fluid in the designated reservoir in the engine bay!


Updated on 25 August 2026 by ScegliAuto


Related tutorials

Guide to replacing the windshield washer pump of the Fiat Panda
Guide to replacing the windshield washer pump of the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Today's instructions will allow us to disassemble and replace the windshield washer pump of the Fiat Panda. To access it, it is necessary to remove t…
How to Replace the Rear Light in a Fiat Panda
How to Replace the Rear Light in a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Before you start, open the boot of your Fiat Panda. Begin by unscrewing and removing the screws that secure the rear light to the vehicle. Then, dise…
Removing and Replacing the Lock Cylinder on Fiat Panda
Removing and Replacing the Lock Cylinder on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this guide, you will find instructions on how to remove and replace the lock cylinder of the front door on the Fiat Panda. First, open the door an…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos