Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing and Replacing the Lock Cylinder on Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Door lock

In this guide, you will find instructions on how to remove and replace the lock cylinder of the front door on the Fiat Panda. First, open the door and begin removing the inner door panel by unscrewing the fixing screws and prying at the edges. Next, unscrew the screws of the lock cylinder to remove it, as shown in the video. At this point, carry out the repair or replacement of the lock cylinder (if replacing, the key will also be changed); then reassemble everything!

Posted on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Throttle Body on the Fiat Panda 1.2
Removing and Replacing the Throttle Body on the Fiat Panda 1.2
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, learn how to remove and replace the throttle body, as well as clean it, on the Fiat Panda 1.2 Petrol. First, open the bonn…
Disassembly of the air conditioning control knobs of the Fiat Panda.
Disassembly of the air conditioning control knobs of the Fiat Panda.
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, we will see the process of disassembling and replacing the air conditioning control knobs of the Fiat Panda. First of all, we…
How to Replace the Fuel Pump Relay on a Fiat Panda
How to Replace the Fuel Pump Relay on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the front bonnet of your Fiat Panda. The fuel pump relay is located inside the fuse box, which is in the engine compartment nea…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos