Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lock Cylinder on a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Door lock

See other generations:
Video tutorial

Before you can start, open the door of your Fiat Panda. First, fully raise the window using the appropriate handle.

Next, remove this handle by simply uncliping it. At this point, unclip the upper panel of the door and then remove it. Once you have removed this panel, you will access the door lock. The lock cylinder is secured by a simple brass clip, which you will need to remove.

After completing this step, you can pull the lock out from the outside, and then unclip the plastic pin, completing the disassembly. To fit the new lock cylinder and close the door, simply reverse these steps, and the replacement will be complete.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Replacing the Door Lock on a Fiat Panda 169
Replacing the Door Lock on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Discover the procedure to remove and replace the door lock cylinder on the front door of a Fiat Panda 169, second series. First, open the front door …
How to Replace the Lock on a Fiat Panda
How to Replace the Lock on a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) The video is based on the lock of an Autobianchi Y10, but the lock is identical to that of a Fiat Panda as they are sister models. Start by removing …
How to Replace the Lock on a Fiat Panda?
How to Replace the Lock on a Fiat Panda?
Fiat Panda (1980-2003 / MK 1, 141) The lock cylinder is secured with a clip. Start by removing this clip using a flathead screwdriver. Once the clip is removed, you will uncover a tab …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos