Do it yourself
Frequently asked questions about cars and motorcycles

Where is the central locking fuse located in the Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2023
Part: Lock

In the event of a malfunction in the central locking of the Fiat Panda, we can first of all check the status of the respective fuse whose position is indicated in this video. As we can see, it is located in the box inside the passenger compartment, in the lower left area on the driver's side, and is labeled with the initials F38. As for its amperage, it is 20A. If it fails, make sure to use a spare with the same specifications and to always operate with the vehicle off, so as not to cause any damage to the various connected devices or to ourselves.


Posted on 28 July 2024 by ScegliAuto



Where is the fuse box located in the Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) The Fiat Panda model 169, from 2012, contains two fuse boxes. The first fuse box is located inside the cabin, on the left side of the dashboard. Insi
How to install the Fiat Panda central locking control unit?
Fiat Panda (1980-2003 / MK 1, 141) In order to install the Fiat Panda central locking control unit, you need to connect the device cables as shown in the video: once the cables have be
How to install the central locking on the Fiat Panda?
Fiat Panda (1980-2003 / MK 1, 141) In order to install the central locking of the Fiat Panda, a control unit must be installed that will manage the operation of the system: this contro

Where is the battery located in the Toyota RAV4 Hybrid?

In this video, we can see where the battery is located in the Toyota RAV4 Hybrid, which is useful in case we need to replace it or perform an emergency start. As shown, it is located at the back of the vehicle, precisely at the base of the right wall of the luggage compartment. To access it, we must first remove the bottom panel, then disassemble the right drawer and then the small storage compartment. To remove it, it will be sufficient to unscrew the two bolts of the upper bracket and disconnect both terminals, always starting from the negative one.

Watch the video!


by ScegliAuto

More videos