Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Door Lock on a Fiat Panda 169

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Door lock

Discover the procedure to remove and replace the door lock cylinder on the front door of a Fiat Panda 169, second series. First, open the front door and begin by removing the door panel, taking off various plastic covers and unscrewing all the screws. Then, pry at the edges to detach and remove the door panel. At this point, unclip the lock mechanism, removing the cylinder along with the handle; then separate the lock from the handle and replace it with the new one.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the inner door panel in the Fiat Panda 169?
How do you remove the inner door panel in the Fiat Panda 169?
Fiat Panda (2003-2012 / 169, MK 2) Disassembling the interior panel of the door of the Fiat Panda 169, as with any other car, could be a consequence related to an attempted theft, as i…
How to Remove the Trim Panel of the Fiat Panda 169
How to Remove the Trim Panel of the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video, you will learn how to remove the front door panel of the Fiat Panda 169. There are two screws at the internal lock, one under the armr…
Activating the Rear Door Lock on a Fiat Panda
Activating the Rear Door Lock on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today, in this brief but useful video tutorial, you will learn how to lock the rear doors of a Fiat Panda; this mechanism is designed specifically fo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos