Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Panda
  6. : How to dismantle the interior panel of the Fiat Panda 169.

Fiat Panda - Video tutorial

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Door
Operation: How to dismantle the interior panel of the Fiat Panda 169.

In this video, we see how to disassemble the front door panel of the Fiat Panda 169. There are two screws on the interior lock, one under the armrest, and two clearly visible under the inner plastic cover. We just need to remove the darker triangular piece at the top (which covers the mirror controls), and then the panel comes off. First, we remove the plastic pieces of the interior lock and tweeter with a plastic spatula, then we proceed to remove all the screws we have indicated, and then lever the panel off with a plastic spatula; we remove the handle cable, and at this point, the panel comes off. Before reassembling it, we check that the clips are intact and in their proper place on the panel, not on the door.


Posted on 11 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2003-2012 - Why does the door open light on the Fiat Panda stay on? Read Answer
    • Panda 2003-2012 - How much does the Fiat Panda 169 door lock cost? Read Answer

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos