Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the inner door panel in the Fiat Panda 169?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Door trim panel

Disassembling the interior panel of the door of the Fiat Panda 169, as with any other car, could be a consequence related to an attempted theft, as in the case of the video available here, for which you are forced to replace the lock cylinder, or for other maintenance interventions and so on. It is not complicated, in fact after removing the screw of the internal handle and the two screws in the lower part of the same panel, a bodywork lever is used to lever around the entire perimeter of the aforementioned panel, applying a slight force, in order to detach it.

Posted on 3 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Drive Shaft on a Fiat Panda 169 4x4
How to Replace the Drive Shaft on a Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Discover in this video the instructions for replacing the drive shaft on a Fiat Panda 169 4x4. First, lift the vehicle and position the jack under th…
How to Remove the Rear Seats from the Fiat Panda 169
How to Remove the Rear Seats from the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In today's tutorial video, see how to remove the rear seats from the Fiat Panda 169, second series, in simple steps. First, open the rear doors and s…
Replacing Rear Brake Shoes on Fiat Panda 169
Replacing Rear Brake Shoes on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video shows how to remove and replace the rear brake shoes on a Fiat Panda 169, second series. First, lift the vehicle and remove the rear wheel…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 1980-2003 - How do you remove the internal door panel on the FIAT Panda 141? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos