Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Door

Fiat Panda - Door

Fiat Panda (2003-2012 / 169, MK 2)
How to dismantle the interior panel of the Fiat Panda 169.
In this video, we see how to disassemble the front door panel of the Fiat Panda 169. There are two screws on the interior lock, one under the armrest, and two …read all…
Posted on 11 February 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to remove the door panel of the Fiat Panda 3 series
To disassemble the door panel of the Fiat Panda, it is necessary to locate the fixing screws, let's consider the disassembly of the door panel on the driver's …read all…
Posted on 16 October 2022 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to lubricate the doors on Fiat Panda
Get svitol or wd40 products to lubricate the hinges and tie rods of the various doors. The video demonstrates how to carry out this procedure by lubricating …read all…
Posted on 11 March 2024 by ScegliAuto
Fiat Panda (2012-2023 / MK 3, 319)
How do you remove the door panel of the Fiat Panda?
To be able to remove the Fiat Panda door panel, remove the two screws located on the side of the panel, one in the internal handle and one in the door opener. …read all…
Posted on 22 February 2024 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
Removing the panel and door lock on Fiat Panda 169
To disassemble the door panel, simply remove all the screw covers on the inside of the door, including those near the opening handle and the grab bar and all …read all…
Posted on 30 December 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (10) Alternator (4) Shock absorbers (15) Antenna (1) Air conditioning (4) Car stereo (33) Roof Rack Bars (4) Battery (9) Coil (2) Air Vents (2) Arm (2) Gearbox (9) Spark plugs (16) Glow plugs (2) Carburetor (1) Bodywork (10) Glove box (2) Control unit (3) Key (16) Timing belt (20) V-belt (3) Air conditioning controls (1) -board computer (16) Checks and maintenance (97) Throttle body (2) Dashboard (13) Gearshift gaiter (3) Drive shaft boot (5) Bearing (6) Mass air flow sensor (1) Differential (3) Brake discs (3) Spacers (1) Headlight (21) Tail light (14) Fog lights (10) Air filter (21) Cabin air filter (28) Petrol filter (4) Diesel filter (6) Oil filter (9) Hand brake (5) Clutch (8) Grille (1) Injectors (4) Accessory Kit (6) Light bulb (16) Side turn signal light bulb (1) Headlight bulb (22) Rear light bulb (10) Interior lights ceiling light bulb (2) Antifreeze liquid (4) Dashboard light (12) License plate light (3) Handle (2) Muffler (5) Engine (10) Window motor (4) Starter motor (4) Gear oil (4) Engine oil (13) Door panel (20) Windshield (3) Front bumper (8) Rear bumper (7) Brake pads (15) Hydraulic pistons (4) Tires (4) Gear Shift Knob (14) Pump (10) Fuel pump (14) Door (5) Push button (1) Instrument cluster (22) Radiator (7) Passenger compartment heating radiator (9) Wheel (2) Fuse box (21) Seat (30) Drive shaft (4) Crankshaft RPM sensor (3) Parking sensors (3) Lock (10) Suspensions (2) Outside rearview mirror (22) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (3) Drums and shoes (4) Windscreen wipers (16) Thermostat (11) Engine head (1) Steering rods (2) Transmission (10) Central tunnel (2) Turbine (1) Windshield washer nozzle (2) Valve (2) EGR valve (2) Interior blower (4) Side window (3) Steering wheel (13)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos