Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Fiat Panda 3rd Series

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Car door

To remove the door panel of the Fiat Panda, you need to locate the fastening screws, considering the removal of the driver's side door panel. Under the panel at the bottom near the sill, there are 2 screws, and another screw is located under the handle profile (opening and closing handle). Additionally, next to the door opening lever, there are plastic trims; use a screwdriver to pry them off, and underneath you will find another screw that needs to be removed to take off the door panel. Once all the aforementioned screws are removed, gently pull the panel towards you, disengaging the fastening clips all around the panel, until the panel is completely removed.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Fiat Panda
How to Remove the Door Panel of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the door of your Fiat Panda. Begin by unfastening and removing the covers near the internal door handle. Next, unscrew and remo…
Replacing the Door Lock on a Fiat Panda 169
Replacing the Door Lock on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Discover the procedure to remove and replace the door lock cylinder on the front door of a Fiat Panda 169, second series. First, open the front door …
How to Remove the Door Panel on a Fiat Panda
How to Remove the Door Panel on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the door panel (driver side) on a Fiat Panda? Let’s see how to proceed in this video. Use a lever to remove the small cover (located ne…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos