Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How do you remove the door panel of the Fiat Panda?

Fiat Panda - Video tutorial

Model: Fiat Panda MK 3, 319 - Years 2012-2023
Part: Door
Operation: How do you remove the door panel of the Fiat Panda?

To be able to remove the Fiat Panda door panel, remove the two screws located on the side of the panel, one in the internal handle and one in the door opener. With a slotted screwdriver, the small triangle of the mirror is released; at this point it will be possible to remove the entire panel. To do this, you have to pull it towards yourself and then lift it, removing all the relative cables and connectors. When the old panel has been removed, it will be possible to go and install the new panel, inserting all the fixing screws previously removed.


Posted on 22 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Panda 2003-2012 - Why does the door open light on the Fiat Panda stay on? Read Answer
    • Panda 2003-2012 - How much does the Fiat Panda 169 door lock cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos