Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Door trim panel

Start by opening the door of your Fiat Panda. Next, unclip and remove the covers located near the internal door handle. Once done, unscrew and remove the screws securing the door panel. At this point, unclip the entire panel, then pull the panel away to disconnect the cable connected to the internal handle. After completing this step, you can fully remove the door panel, successfully finishing the disassembly.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the door of your Fiat Panda. Begin by unfastening and removing the covers near the internal door handle. Next, unscrew and remo…
Fiat Panda (2003-2012 / 169, MK 2) How to remove the door panel (driver side) on a Fiat Panda? Let’s see how to proceed in this video. Use a lever to remove the small cover (located ne…
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the door of your Fiat Panda. Begin by unclipping and removing the covers positioned near the internal handle. Next, unscre…

    Frequently Asked Questions

    • Panda 1980-2003 - How do you remove the internal door panel on the FIAT Panda 141? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos