Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Drive shaft boot

Fiat Panda - Drive shaft boot

Fiat Panda (2003-2012 / 169, MK 2)
How do you replace the drive shaft boot on the Fiat Panda?
In order to replace the drive shaft boot on the Fiat Panda, you must first loosen the bolts that secure the wheel corresponding to the boot that needs to be …read all…
Posted on 6 December 2022 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to replace the drive shaft boot in the Fiat Panda?
In this tutorial we can see how to replace the drive shaft boot in the Fiat Panda. First of all we lift the front part of the vehicle with a jack, obviously …read all…
Posted on 14 June 2022 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Replacement of the gearbox side gaiter of the Fiat Panda 4x4
In today's video tutorial we will see the main instructions for disassembling and replacing the gearbox side gaiter of the Fiat Panda 4x4. As before, we lift …read all…
Posted on 4 May 2024 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
How to replace the CV joint boot of the old Fiat Panda
If you hear a noise coming from the wheel, especially under the steering, it is likely that the constant velocity joint of the drive shaft is working without …read all…
Posted on 16 September 2023 by ScegliAuto
Fiat Panda (1980-2003 / 141, MK 1)
Replacing the driveshaft boots
The headset itself costs a few euros, but if it wears it risks making the gearbox oil leak out, provacandono jamming within a few hours. Unfortunately, the …read all…
Posted on 21 June 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (10) Alternator (4) Shock absorbers (15) Antenna (1) Air conditioning (4) Car stereo (33) Roof Rack Bars (4) Battery (9) Coil (2) Air Vents (2) Arm (2) Gearbox (9) Spark plugs (16) Glow plugs (2) Carburetor (1) Bodywork (10) Glove box (2) Control unit (3) Key (16) Timing belt (20) V-belt (3) Air conditioning controls (1) -board computer (16) Checks and maintenance (97) Throttle body (2) Dashboard (13) Gearshift gaiter (3) Drive shaft boot (5) Bearing (6) Mass air flow sensor (1) Differential (3) Brake discs (3) Spacers (1) Headlight (21) Tail light (14) Fog lights (10) Air filter (21) Cabin air filter (28) Petrol filter (4) Diesel filter (6) Oil filter (9) Hand brake (5) Clutch (8) Grille (1) Injectors (4) Accessory Kit (6) Light bulb (16) Side turn signal light bulb (1) Headlight bulb (22) Rear light bulb (10) Interior lights ceiling light bulb (2) Antifreeze liquid (4) Dashboard light (12) License plate light (3) Handle (2) Muffler (5) Engine (10) Window motor (4) Starter motor (4) Gear oil (4) Engine oil (13) Door panel (20) Windshield (3) Front bumper (8) Rear bumper (7) Brake pads (15) Hydraulic pistons (4) Tires (4) Gear Shift Knob (14) Pump (10) Fuel pump (14) Door (5) Push button (1) Instrument cluster (22) Radiator (7) Passenger compartment heating radiator (9) Wheel (2) Fuse box (21) Seat (30) Drive shaft (4) Crankshaft RPM sensor (3) Parking sensors (3) Lock (10) Suspensions (2) Outside rearview mirror (22) Interior rearview mirror (2) Manufacturer's coat of arms (2) Engine mount (3) Drums and shoes (4) Windscreen wipers (16) Thermostat (11) Engine head (1) Steering rods (2) Transmission (10) Central tunnel (2) Turbine (1) Windshield washer nozzle (2) Valve (2) EGR valve (2) Interior blower (4) Side window (3) Steering wheel (13)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos