Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Panda
  6. : Hydraulic pistons

Fiat Panda - Hydraulic pistons

Hydraulic Pistons Fiat Panda (2003-2012 / 169, mk 2)

Fiat Panda (2003-2012 / 169, MK 2)
How to Replace the Boot Gas Struts on a Fiat Panda

Before starting, open the boot lid of your Fiat Panda. Begin by unfastening and removing the clips that secure the gas struts to their housing, using a small …Read all…
Posted on 10 May 2026 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to Replace the Tailgate Gas Struts on a Fiat Panda

How to replace the gas struts on the tailgate of a Fiat Panda? Here’s how to replace the parts. Lift the tailgate and secure it with a prop (if removing both …Read all…
Posted on 3 April 2026 by ScegliAuto
Fiat Panda (2003-2012 / 169, MK 2)
How to Replace the Tailgate Struts on a Fiat Panda

Learn how to replace the tailgate struts on a Fiat Panda. This is a very simple operation, follow these steps: lift the rear tailgate of the boot and secure …Read all…
Posted on 21 March 2026 by ScegliAuto

Cigarette lighter (4) Airbag (15) Alternator (4) Speaker (1) Shocks (18) Antenna (1) Air conditioning (4) Car stereo (38) Anti-roll bar (1) Roof rack bars (5) Battery (13) Ignition coil (2) Air vents (2) Control arm (3) Transmission (9) Spark plugs (18) Glow plugs (2) Carburetor (2) Body (15) Glove compartment (2) Snow chains (1) Control unit (4) Key (25) Timing belt (34) V-belt (3) Air conditioner (1) A/C controls (2) Onboard computer (8) Checks and maintenance (71) Throttle body (2) Dashboard (14) Shifter boot (5) CV boot (5) Bearing (7) MAF sensor (1) Differential (4) Brake rotors (3) Wheel spacers (1) Headlight (31) Tail light (18) Fog lights (10) Air filter (29) Cabin air filter (35) Fuel filter (4) Diesel fuel filter (7) Oil filter (10) Parking brake (5) Clutch (9) Grille (1) Fuel injectors (4) Accessory kit (5) Light bulb (20) Side marker bulb (2) Headlight bulb (29) Tail light bulb (13) Interior dome light bulb (2) Antifreeze coolant (5) Instrument panel light (12) License plate light (5) (1) Handle (3) Exhaust muffler (6) Engine (10) Power window motor (4) Starter motor (8) Transmission fluid (5) Engine oil (16) Clock (36) Door trim panel (22) Windshield (3) Front bumper (10) Rear bumper (8) Brake pads (18) Hydraulic pistons (3) Shift knob (16) Pump (12) Fuel pump (15) Car door (6) Push button (1) Instrument cluster (11) Radiator (7) Heater core (11) Wheel (3) Fuse box (36) Seat (33) Axle shaft (4) Crankshaft position sensor (3) Parking sensors (3) Door lock (11) Suspension system (2) Side mirror (24) Rearview mirror (2) Warning light – error code (21) (22) Tire pressure warning light (9) Service warning light (44) Manufacturer emblem (2) Engine mount (3) Brake drums and shoes (4) Fuel cap (3) Windshield wipers (20) Thermostat (12) Cylinder head (1) Tie rods (2) Drivetrain (11) Center console tunnel (2) Turbocharger (1) Windshield washer nozzle (2) Valve (2) EGR valve (3) Blower motor (5) Side window (4) Steering wheel (14)

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos