Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tailgate Gas Struts on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Hydraulic pistons

See other generations:
Video tutorial

How to replace the gas struts on the tailgate of a Fiat Panda? Here’s how to replace the parts. Lift the tailgate and secure it with a prop (if removing both struts); use a screwdriver to remove the metal clips securing the ends of the strut.

Detach the worn strut from the body and fit the new part into place. Secure the strut with the metal clips.

Repeat the same process for the removal/installation of the second strut. Test the correct operation of the new struts.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Replace the Tailgate Struts on a Fiat Panda
How to Replace the Tailgate Struts on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Learn how to replace the tailgate struts on a Fiat Panda. This is a very simple operation, follow these steps: lift the rear tailgate of the boot and…
How to Replace the Boot Gas Struts on a Fiat Panda
How to Replace the Boot Gas Struts on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the boot lid of your Fiat Panda. Begin by unfastening and removing the clips that secure the gas struts to their housing, using…
How to Test and Clean the EGR Valve on a Fiat Panda 1.3 Multijet
How to Test and Clean the EGR Valve on a Fiat Panda 1.3 Multijet
Fiat Panda (2003-2012 / 169, MK 2) Today, this guide will provide instructions on how to test and clean the EGR valve on a Fiat Panda 1.3 Multijet. First, open the bonnet and start by …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos