Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : Removing the panel and door lock on Fiat Panda 169

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Door
Operation: Removing the panel and door lock on Fiat Panda 169

To disassemble the door panel, simply remove all the screw covers on the inside of the door, including those near the opening handle and the grab bar and all those around it. Finally, remember to disconnect the connectors of the window lifter buttons and the speakers: to do this, tighten the connector tab and pull without pulling on the wires. Now that the panel is gone, you will have enough space to remove the lock cylinder and to unscrew the handle from the inside and take it out from the outside. Reassemble all the pieces you want to replace obviously proceeding backwards.


Posted on 30 December 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2003-2012 - Why does the door open light on the Fiat Panda stay on? Read Answer
    • Panda 2003-2012 - How much does the Fiat Panda 169 door lock cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos