Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the speakers of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Speaker

Today we will explain how to replace the speakers of the Fiat Panda model 169. Before removing the speakers, it is necessary to remove the door panel. Let's start with replacing the driver's side speaker, open the door and using a star screwdriver, unscrew the four screws that hold the panel in place. To remove the top part of the panel, insert a flat tip screwdriver into the seal and with light pressure, remove the panel. Disconnect the connector and using the star screwdriver, unscrew the screws on the speaker. Replace the speaker and complete the replacement by mounting the door panel back on, proceed in the same way with the rear speakers and the front right speaker.

Posted on 3 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel with Speakers on a Fiat Panda
How to Remove the Door Panel with Speakers on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To remove the speakers located in the door panel on a Fiat Panda, follow these steps. Before starting the disassembly, disconnect the battery termina…
How to Remove the Window Regulator Motor from a Fiat Panda
How to Remove the Window Regulator Motor from a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How to remove the window regulator motor from a Fiat Panda and don't know how to do it? Let's see how to proceed in this video: disconnect the batter…
How to Replace the Gear Knob on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, sit in the driver's seat of your Fiat Panda. It is strongly advised to perform this operation with the engine off, to avoid acc…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos