Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Lock Cylinder of a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Door lock

See other generations:
Video tutorial

Before you start, you need to open the door of your Fiat Panda. Begin by fully winding down the window using the designated handle.

Next, remove this handle by simply prising it off. At this point, remove the upper door panel. Once you have removed this panel, you will have access to the door lock.

The lock cylinder is secured by a simple brass clip, which you need to remove. Once you have taken off this clip, you can pull the lock out from the outside, then detach the plastic pin, and the disassembly will be complete.

To fit the new lock cylinder and close the door, simply reverse these steps, and you will have successfully completed the replacement.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Lock Cylinder on Fiat Panda
Removing and Replacing the Lock Cylinder on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this guide, you will find instructions on how to remove and replace the lock cylinder of the front door on the Fiat Panda. First, open the door an…
Replacing the Door Lock on a Fiat Panda 169
Replacing the Door Lock on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Discover the procedure to remove and replace the door lock cylinder on the front door of a Fiat Panda 169, second series. First, open the front door …
How to Replace the Lock Cylinder on a Fiat Panda
How to Replace the Lock Cylinder on a Fiat Panda
Fiat Panda (1980-2003 / MK 1, 141) Before you can start, open the door of your Fiat Panda. First, fully raise the window using the appropriate handle. Next, remove this handle by simpl…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos