Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Timing belt

See other generations:
Video tutorial

Today, learn how to replace the timing belt on a Fiat Panda. The timing belt must be replaced when it reaches 37,000 miles.

To carry out the replacement, open the front bonnet and remove the screws securing the belt cover located at the side of the engine. After removing the cover, use an 8 mm socket to undo the nut that secures the tensioner.

Loosen the pulley and remove the belt roller, then gently slide out the worn belt. Insert the new belt and tighten the roller.

Tighten the pulley and refit the cover. If necessary, apply some grease to the belt before fitting it. Before hitting the road, start the vehicle and increase the engine revs so that the belt begins to tighten on the rollers.


Posted on 24 March 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Fiat Panda?
How to Replace the Timing Belt on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Good morning, today's guide aims to replace the timing belt on your Fiat Panda. Start by opening the front bonnet. Next, remove all components relate…
How and When to Change the Timing Belt on the Fiat Panda 1.1
How and When to Change the Timing Belt on the Fiat Panda 1.1
Fiat Panda (2003-2012 / 169, MK 2) Briefly, we will see some important instructions on how and when to change the timing belt on the Fiat Panda 1.1 petrol; for this type of engine, it …
How to replace the timing belt of the Fiat Panda
How to replace the timing belt of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will explain how to replace the timing belt of the Fiat Panda. We start the replacement by opening the front hood, then we disassemble and r…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos