Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on a Fiat Panda

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Part: Pump

See other generations:
Video tutorial

Release and lift the bonnet, then remove the intake manifold to work more comfortably in the affected area. This way, you can work directly on the belt removal.

Next, unscrew the bolts securing the pump, extract the damaged pump, and install the new pump by following the disassembly steps in reverse. Finally, reinsert the belt in the correct position and reassemble the intake manifold, retracing the steps for reassembly.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

Guide to Replace the Water Pump on the Fiat Panda 1.2 (169)
Guide to Replace the Water Pump on the Fiat Panda 1.2 (169)
Fiat Panda (2003-2012 / 169, MK 2) In this guide, we will see the main instructions for disassembling and replacing the water pump, as well as the timing belt, on the Fiat Panda 1.2, s…
How to Replace the Water Pump on a Fiat Panda
How to Replace the Water Pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the water pump on a Fiat Panda, lift the car so that the front right wheel is off the ground: this wheel will then need to be removed alon…
How to replace the water pump of a Fiat Panda?
How to replace the water pump of a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the water pump of a Fiat Panda, it is necessary to follow some key steps. First of all, make sure the engine is cold and the car is safely…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos