Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling and Replacing Water Pump

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Pump

Start by removing the air box and the air hose by releasing the retaining clips. Next, dismantle the timing belt. Drain the radiator by operating the appropriate valve, then remove the four retaining bolts of the pump and extract it from its housing. Clean the pump housing thoroughly, replace the gasket, applying a suitable paste that is resistant to temperature and water between the gasket and the metal part. Refit the new pump and install the timing belt, ensuring the correct tension. The belt should have about one centimetre of flexibility. Refill the radiator with new coolant. Start the engine and check the water temperature.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Water Pump on a Fiat Panda
How to Change the Water Pump on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) If only water is introduced into the engine cooling system instead of the proper coolant, rust may form in the system, causing damage to the water ci…
How to replace the water pump of a Fiat Panda?
How to replace the water pump of a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the water pump of a Fiat Panda, it is necessary to follow some key steps. First of all, make sure the engine is cold and the car is safely…
How to Replace the Water Pump on a Fiat Panda
How to Replace the Water Pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the water pump on a Fiat Panda, lift the car so that the front right wheel is off the ground: this wheel will then need to be removed alon…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos