Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen Washer Pump of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Pump

See other generations:
Video tutorial

Let’s see how to remove the windscreen washer pump of a Fiat Panda. Using a screwdriver, undo the screws of the right splash guard and remove it from its position.

Dismantle the electric pump connected to the water reservoir (located behind the splash guard). Once the part is removed, disconnect the power connector and pull it out from its seat.

Compare the new part with the damaged one and test its correct operation. Refit the new part in the engine bay, secure it to the water reservoir, and reconnect the power connector.

Reattach the protective splash guard. Finally, test the correct operation of the previously installed part.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen Wiper Pump on a Fiat Panda
How to Replace the Windscreen Wiper Pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Do you want to remove the faulty windscreen wiper pump? Let's see in this detailed video how to proceed on a Fiat Panda. Start by using a socket to r…
How to Replace the Windscreen Washer Pump on a Fiat Panda
How to Replace the Windscreen Washer Pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) The following steps will show you how to remove and replace the windscreen washer pump on a Fiat Panda. First, open the bonnet and start by removing …
How to Replace the Water Pump on a Fiat Panda
How to Replace the Water Pump on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the water pump on a Fiat Panda, lift the car so that the front right wheel is off the ground: this wheel will then need to be removed alon…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos