Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Timing Belt on a Fiat Panda

Model: Fiat Panda 141, MK 1 - Years 1980-2003
Part: Pump

Lift the bonnet and secure it. Then, using a screwdriver, unscrew the locking pins of the ventilation pipe and remove the soundproofing panel from the engine bay. Raise the car on a jack. Start by loosening the tensioner bolts with a socket spanner (remove the belts). Once the belts are removed, disconnect the water pump. Finally, refit the water pump in the engine bay. Install the new belts and their covers. Refit the soundproofing panel of the engine.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Fiat Panda?
How to Replace the Timing Belt on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Good morning, today's guide aims to replace the timing belt on your Fiat Panda. Start by opening the front bonnet. Next, remove all components relate…
How and When to Change the Timing Belt on the Fiat Panda 1.1
How and When to Change the Timing Belt on the Fiat Panda 1.1
Fiat Panda (2003-2012 / 169, MK 2) Briefly, we will see some important instructions on how and when to change the timing belt on the Fiat Panda 1.1 petrol; for this type of engine, it …
How to replace the timing belt of the Fiat Panda
How to replace the timing belt of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will explain how to replace the timing belt of the Fiat Panda. We start the replacement by opening the front hood, then we disassemble and r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos