Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Fiat Panda 1.2

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Timing belt

In this guide, we will see the main instructions useful for disassembling and replacing the timing belt of the Fiat Panda 1.2 petrol. First of all, we open the engine hood of the vehicle and start disassembling and removing the engine support located on the left, unscrewing the fixing screws; then we lift the vehicle and remove the crankshaft pulley, first disconnecting the V-belt (loosening the tensioner), as shown in the video. At this point, we remove the distribution cover to access the belt, replacing it with the new original one!

Posted on 29 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on a Fiat Panda?
How to Replace the Timing Belt on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) Good morning, today's guide aims to replace the timing belt on your Fiat Panda. Start by opening the front bonnet. Next, remove all components relate…
Guide to Replacing the Timing Belt on the Fiat Panda 4x4
Guide to Replacing the Timing Belt on the Fiat Panda 4x4
Fiat Panda (1980-2003 / 141, MK 1) Today's guide will illustrate some important steps on how to remove and replace the timing belt on the Fiat Panda 4x4. The timing belt on the Panda 9…
How to replace the timing belt of the Fiat Panda
How to replace the timing belt of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today we will explain how to replace the timing belt of the Fiat Panda. We start the replacement by opening the front hood, then we disassemble and r…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos