Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to replace the fog light bulbs of a Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Fog lights
Operation: How to replace the fog light bulbs of a Fiat Panda

With a slotted screwdriver we start by unscrewing the two screws on the lower side of the fog light. As soon as we have unscrewed these screws, we will continue by unscrewing all the bolts all around the spotlight with an Allen key. Once we have unscrewed everything that fixed the fog light, we can remove it from its seat. We will therefore be able to notice a cap in the rear part of the fog light, which must be unscrewed by turning it anti-clockwise. By doing so we will have access to the bulb, which we will promptly remove from its seat, disconnecting the clip that fixes it. When it is out of its seat, we will be able to disconnect the cable that is connected to the light bulb. At this point we take the replacement bulb and connect it to its plug. To reassemble everything, simply follow all the steps in reverse.


Posted on 17 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Panda 2003-2012 - Where are the fog lights located in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How do you replace the fog lights on the Fiat Panda? Read Answer
    • Panda 2012-2023 - How much do the fog lights (assembly included) cost on a 2020 Fiat Panda Easy? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos