Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
141, MK 1
- Years 1980-2003 If you need to carry out an extraordinary maintenance operation on the car and in particular replace the kinetic joint, we can follow the instructions below and help us also with the images in the video. First we have to remove the wheel, lift the car and start removing the hub bolts, then proceed to remove the entire axle shaft and then remove the constant velocity joint by first removing the cap, to remove the joint it is necessary to unscrew the fastening to the transmission. In the spare part box of the constant velocity joint there is also grease which must be added before reassembling it. Finally, proceed backwards to reassemble all the components to complete the job.
Posted on 12 April 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.076
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |