Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Engine RPM Sensor on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Crankshaft position sensor

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the engine RPM sensor from a Fiat Panda, specifically the 4X4 model. First, remove the front wheel on the passenger side by lifting the car and unscrewing the bolts, then remove the screws from the wheel arch to access the engine parts.

Locate the sensor near the pulley attached to the crankshaft: to remove it, take out the main screw of the sensor and slide it off (to be unscrewed with a 10 mm spanner). Now, refit the new sensor and all the parts previously removed.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

How to Replace the Crankshaft Position Sensor on a Fiat Panda
How to Replace the Crankshaft Position Sensor on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda. Begin by lifting the front of the car. Then, unclip the connector securing the crankshaft positi…
How to Remove the Oil Pressure Sensor on the Fiat Panda
How to Remove the Oil Pressure Sensor on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today, in this video tutorial, learn how to remove and replace the engine oil pressure sensor and the crankshaft speed sensor on the Fiat Panda. Firs…
Where to Find the VIN Number on the Fiat Panda 169
Where to Find the VIN Number on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this video, see where the legal chassis number of our Fiat Panda version 169 is located: the legal chassis number is what you need if you have to …

    Frequently Asked Questions

    • Panda 2012-2021 - Where is the camshaft sensor of the Fiat Panda Twinair located? Read answer

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos