Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Bearing

To replace the front wheel bearing on a Fiat Panda, lift the car so you can unscrew the bolts securing the corresponding front wheel. Once the wheel is removed, loosen the bolts that secure the brake disc and caliper, completely removing both. Next, unscrew the bolts of the joints that secure the wheel hub and remove it as well: the bearing can then be extracted from inside and replaced with a new one, reinstalling all the parts that were removed.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Rear Wheel Bearing Replacement for Fiat Panda
Rear Wheel Bearing Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this guide, discover how to disassemble and replace the rear wheel bearing of the Fiat Panda by following these simple steps. First, lift the vehi…
How to Replace the Rear Wheel Bearing on a Fiat Panda 169?
How to Replace the Rear Wheel Bearing on a Fiat Panda 169?
Fiat Panda (2003-2012 / 169, MK 2) To replace the rear wheel bearing on a Fiat Panda 169, lift the car using a jack or ramp and loosen the bolts securing the rear wheel, completely rem…
Replacing the Rear Wheel Bearing on the Fiat Panda 4x4
Replacing the Rear Wheel Bearing on the Fiat Panda 4x4
Fiat Panda (1980-2003 / 141, MK 1) In today's tutorial, you will learn how to remove and replace the rear wheel bearing on the Fiat Panda 4x4 by following these simple and quick steps.…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos