|
Do it yourself
| |||
| ||||
How to change the brake fluid on a Fiat Tipo 356
Model: Fiat Tipo
356, 357, 358
- Years 2016-2026
To perform this operation, place the car on axle stands and remove the wheels. Start with the left rear caliper, which is the furthest from the pump. Open the bonnet, siphon the old fluid from the reservoir with a pump, and top up with new DOT4 fluid to the maximum level. Place an 11 mm spanner on the caliper bleed screw and attach a clear tube that ends in a bottle. Have an assistant pump the pedal several times until it becomes firm. Open the bleed screw; the pedal will drop and old fluid will come out. Close the bleed screw before the pedal reaches the end of its travel; repeat until new, clean fluid comes out. Check the level: after 2-3 openings, the reservoir should remain full. Repeat the same procedure on the other calipers: right rear (11 mm spanner), right front (8 mm spanner), and then left front (8 mm spanner). Top up the reservoir to the correct level, refit the wheels, and tighten the bolts to 115 Nm with a torque wrench.
Posted on 27 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Tipo
(2016-2026 /
356, 357, 358)
Today, let’s see how to change or adjust the time on the Fiat Tipo 356 in simple and quick steps. Get inside the car and turn on the ignition; then t…
Fiat Tipo
(2016-2026 /
356, 357, 358)
Here are the instructions for performing the routine service, replacing the engine oil and oil filter, on the Fiat Tipo 356 with a 1.6 MultiJet engin…
Fiat Tipo
(2016-2026 /
356, 357, 358)
In this video, learn how to service the transmission by replacing the gearbox oil on a Fiat Tipo 356, following these simple steps. First, open the b…
Other guides you may be interested in
|
How to Replace the Gear Knob on the Citroen C3 2015
In this mini guide, you will learn how to correctly replace the gear knob on your 2015 Citroen C3. First, ensure you purchase a new gear knob that is fully compatible with your vehicle. Then, enter the cabin and use a flat screwdriver (or a key) to remove the plastic cover from the gear lever. Next, break the safety clip and remove the leather cover. At this point, you can detach the gear knob and replace it with the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.288
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |