Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Wheel on a Fiat Tipo Station Wagon

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Wheel

In this video, learn how to replace a wheel on a Fiat Tipo Station Wagon: open the boot and take the wheel removal kit, which includes: jack, jack handle, screwdriver, wheel nut key (if present), telescopic wrench, spare wheel. Position the jack under the jacking point of the vehicle (under the stiffest part of the chassis), lift the car slightly and loosen the wheel nuts. Raise the car with the jack handle, unscrew the nuts, and pull the wheel off the hub. Fit the spare wheel onto the hub with the respective nuts and lower the car to the ground. Always remember to store the removal kit with all its parts in the boot after maintenance.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses in a Fiat Tipo 2019
Where to Find the Fuses in a Fiat Tipo 2019
Fiat Tipo (2016-2026 / 356, 357, 358) The Fiat Tipo 2019 has four fuse boxes: the first is located between the battery and the right side of the body in the engine bay (when looking at th…
How to Replace the Front Brake Pads on a Fiat Tipo?
How to Replace the Front Brake Pads on a Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the front brake pads on a Fiat Tipo, lift the car using a jack or ramp so that the corresponding wheel is off the ground. Next, loosen the…
How do you replace the front shock absorber of the Fiat Tipo?
How do you replace the front shock absorber of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) It will be possible to replace the front shock absorber of the Fiat Tipo by opening the hood to access the components located inside the engine compa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos