Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Fiat Tipo remote control

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Key

The steps to follow to replace the battery of the Fiat Tipo car remote are simple and quick to perform independently. The materials you will need to carry out this operation are a new CR 2032 battery and a flat-head screwdriver. Insert the screwdriver at the base of the remote and apply slight pressure to remove the cover. Unscrew the battery compartment using the screwdriver and proceed to the next step. Replace the battery and close the compartment. Close the cover and test the remote's functionality. If it still does not work, you may need to try reprogramming the remote.

Posted on 16 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Fiat Tipo?
How to Replace the Remote Battery of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the remote battery of the Fiat Tipo, lift the emergency key from the device to leverage it in its housing. This will allow you to remove t…
How to Replace the Remote Battery of the Fiat Tipo?
How to Replace the Remote Battery of the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) To replace the remote battery of the Fiat Tipo, press the button on the top of the device to access the bottom of the key housing. Here, you will fin…
Replacing the Remote Key Battery on the Fiat Tipo 356
Replacing the Remote Key Battery on the Fiat Tipo 356
Fiat Tipo (2016-2026 / 356, 357, 358) In this short video, you will see how to disassemble and replace the battery in the remote key for the Fiat Tipo 356 by following these simple steps.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos