Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the external handle of the front door of the Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Handle

Below we will see the main instructions that will allow us to disassemble and replace the external handle of the front door of the Fiat Tipo. First, we open the front door of the car and start unscrewing the side screw of the opening handle; then we remove the side cap of the handle or the lock cylinder, then removing the rest of the handle, as shown in the video. At this point, we proceed to install the new external handle, fixing it correctly on the door, following the video tutorial until the end!

Posted on 22 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a Fiat Tipo
How to Remove the Front Door Panel of a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you can start, open the front door of your Fiat Tipo. Begin by unclipping and removing the inserts from the door panel, then remove the covers…
How to Remove the Number Plate Light on a Fiat Tipo
How to Remove the Number Plate Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Learn how to remove the number plate light on a Fiat Tipo to replace the bulb. Use a screwdriver or plastic lever to remove the number plate light lo…
How to Reset the "TPMS" Light on a Fiat Tipo
How to Reset the "TPMS" Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos