Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Door Trim of the Fiat Tipo?

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Door trim panel

The vehicle shown in the video above is a Fiat Tipo, and now we will explain how to remove the inner door panel if necessary. The steps to follow are: open the door, unscrew the two screws on the side pillar, the screw for the handle, the screw for the window switch, and the two screws located at the bottom. Next, we need to disconnect the window switch electrically after removing it, and then remove the inner trim located near the external electric mirror. Job done.

Updated on 30 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external handle of the front door of the Fiat Tipo
How to disassemble the external handle of the front door of the Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) Below we will see the main instructions that will allow us to disassemble and replace the external handle of the front door of the Fiat Tipo. First, …
How to Replace the Front Headlight Bulbs on Fiat Tipo
How to Replace the Front Headlight Bulbs on Fiat Tipo
Fiat Tipo (2016-2026 / 356, 357, 358) How to replace the front headlight bulbs on a Fiat Tipo? Prepare to remove the plastic cover at the bottom of the bumper using a suitable screwdriver…
How to disassemble and reassemble the trunk lining on a FIAT TIPO (356) 1.6 MULTIJETT
How to disassemble and reassemble the trunk lining on a FIAT TIPO (356) 1.6 MULTIJETT
Fiat Tipo (2016-2026 / 356, 357, 358) So, to disassemble and reassemble the trunk lining, armed with patience and a screwdriver. First, remove the floor panel by gently lifting it and set…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - How is the door panel removed in the 2017 Fiat Tipo? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos